pb this product manufactured with lead-free processing do not scale from this print .253 ref (typ) 6.42 * "c" ref qcd-xx-01 qcd-xx-02 sub-tcf-3850-30-01-xx.xx (see table 1 for qty) "b" ref (typ) .775 ref 19.69 (typ) length: xx.xx + "l" ref (see table 4) "a" ref (typ) .565 14.35 ref (typ) length: xx.xx 1% 'a' sts-01 (tighten to 1.4 - 1.7 in-lbs) (4 plcs) c1 first end second end 01 n-1 (see table 3) n (see table 3) 02 n (see table 3) n-1 (see table 3) 01 02 sub-hqcd-x-xxx-xx-xx sub-hqcd-x-xxx-xx-xx hdrl-11 (see note 5) length ref detail 'a' scale 2.5 : 1 hqcd-xxx-xx.xx-xxx-xxx-x-x no of positions -030, -060, -090, -120 (per row) length -xx.xx (inches) (03.75[95.3] min) (see note 2) (see note 8) first end -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 2) -teu: terminal, edge mount, up -ted: terminal, edge mount, down -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 5 & sheet 4) -tpu: terminal, panel mount, up -tpd: terminal, panel mount, down -spu: socket, panel mount, up -spd: socket, panel mount, down (see table 11 & sheet 6) (only available on -030,-060, and -090) second end wiring option -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 9, sheet 6) -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 3) -teu: terminal, edge mount, up -ted: terminal, edge mount, down -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 5 & sheet 4) -f: screw option first end only (not available with xpx options) -s: screw option second end only -b: screw option both ends (not available with xpx options) -n: no caps -l: first end rt1 option (see notes 9 & 10) -r: second end rt1 option (see notes 9 & 10) -d: both ends rt1 option (see notes 9 & 10) -1: first end screw option, second end rt1 option (see notes 9 & 10) -2: first end rt1 option, second end screw option (see notes 9 & 10) (see fig. 3, sheet 5 for edge mount end options) (see fig. 4, sheet 5 for double vertical end options) (see fig. 5, sheet 5 for no caps) (leave blank for standard caps both ends) end option c fig. 1 c3 c2 vertical (hqcd-060-xx.xx-str-str-1 shown) * -dv end options only t t sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 1 sheet scale: 1:0.8 f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents a critical dimension. 2. sub-tcf length is equal to hqcd length. 3. all assemblies to be 100% electrically tested for shorts and opens. 4. all assemblies to be 100% hi-pot tested at 300v. 5. top sub-tcf not shown in this view for clarity; hdrl-11 to be centered on lower sub-tcf as shown; hdrl-11 is to contain: line 1 - part number hqcd-xxx-xx.xx-xxx-xxx-x-x line 2 - shop order number xxxxxx line 3 - date code xxxxx 6. for packaging requirements reference packaging standards. 7. parts to be processed per samtec acceptability requirments: hdr-p1-01 "cable assembly workmanship standards". 8. cable lengths longer than 40.00 inches are not supported by s.i. test data. 9. rt1 option is not available with edgemount or panel mount end options. 10. rt1 option is not available with -120 positions. 11. all positions transmitted as signals across coax center conductors. connector ground blade tied to coax shield. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision t
-ttr t1 t30 n n-1 1 2 t b -ttl n n-1 t30 t1 1 2 b t 1 2 b1 b30 n n-1 n n-1 b1 b30 1 2 -tbr b t -tbl b t -str n-1 n t30 t1 2 1 b t -stl 2 1 t30 t1 n-1 n b t n-1 n b1 b30 2 1 2 1 b1 b30 n-1 n -sbr b t -sbl b t first end - vertical (see table 9, sheet 7) sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 2 sheet scale: 1.25:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
-ttr t1 t30 2 1 n n-1 t b b30 b1 n n-1 2 1 -tbr t b -ttl t1 t30 1 2 n-1 n t b b1 b30 1 2 n-1 n -tbl t b -str t1 t30 2 1 n n-1 t b b30 b1 2 1 n n-1 -sbr t b -stl t1 t30 n-1 n 1 2 t b n-1 b30 b1 n 1 2 -sbl t b second end - vertical (see table 9, sheet 7) sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 3 sheet scale: 1.25:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"d" ref length: xx.xx + "l" ref (see table 4, sheet 1) qcd-xx-03 .271 6.88 ref sub-hqcd-x-xxx-03-xx t1 t30 -teu 2 1 n-1 n b t b30 b1 -ted 2 1 n-1 n b t t1 t30 -seu n n-1 1 2 b t b30 b1 -sed n n-1 1 2 t b -teu t30 t1 n-1 n 2 1 b t -ted b1 b30 n-1 n 2 1 t b -seu t30 t1 1 2 n n-1 b t -sed b1 b30 1 2 n n-1 t b fig. 2 edge mount (no captive panel screws) (hqcd-030-xx.xx-teu-str-x shown) (same as fig. 1, unless otherwise stated) first end - edge mount (see table 9, sheet 7) second end - edge mount (see table 9, sheet 7) sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 4 sheet scale: 1:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"e" ref qcd-xx-03-cps cps-4-40-01-x "f" ref "g" ref "h" ref .129 ref (typ) 3.28 .250 6.34 ref (typ) qcd-xx-02-sdo "j" ref .228 5.79 ref (see table 10) "k" (see table 10) "l" sub-hqcd-x-xxx-03-xx sub-tcf-3850-xx-01-xx.xx sub-hqcd-x-xxx-xx-xx apply uv epoxy to all cable ends (height not to exceed .065[1.65] above pcb surface) edge mount (with captive panel screws) (hqcd-030-xx.xx-seu-xxx-1-f shown) (same as fig. 2, unless otherwise stated) fig. 3 fig. 4 double vertical (with screw down option) (hqcd-030-xx.xx-ttr-xxx-1-f shown) (same as fig. 1, unless otherwise stated) fig. 5 (hqcd-xxx-xx.xx-teu-str-1-n shown) (same as fig. 1 except as shown) sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 5 sheet scale: 1.25:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
ref "l" ref "m" .656 16.67 ref sub-qcd-xxx-03-bulk .372 9.45 ref ref "k" ref "j" 4-40 thd ref (typ) t1 t20 1 2 n n-1 t b t b b20 b1 1 2 n n-1 t b b20 b1 n-1 n 2 1 t1 t20 n-1 n 2 1 t b -tpu -tpd -spd -spu fig. 6 panel mount (bulk head screw inserts) (hqcd-xxx-xx.xx-spu-xxx-x shown) (same as fig. 1 except as shown) first end - panel mount (see table 9, sheet 7) sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 6 sheet scale: 1.25:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
length: xx.xx + "l" ref (see table 4, sheet 1) "s" ref "p" ref fig. 7 (hqcd-030-xx.xx-ttl-str-d shown) (same as fig. 1 except as shown) .462 ref 11.74 qcd-xx-01 qcd-xx-14 .292 ref 7.42 qcd-xx-01 qcd-xx-14 sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 7 sheet scale: 1:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
for rt1 option sub assembly add -rt1 to the end of the sub assembly callout listed in the table above. sheet of 0.5mm high-speed coax cable assembly by: hqcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 04/29/03 8 8 sheet scale: 1.25:1 revision t f:\dwg\misc\mktg\hqcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
